Identifying The Parts - Hisense HS312 User Manual

Identifying the Parts

Main Unit
1 Remote Control Sensor
Receive signal from the remote control.
2 Display Window
Show the current status.
3 (ON/OFF) button
Switch the unit between ON and Standby
mode.
4
(SOURCE) button
Select the play function.
5 VOL+/VOL- buttons
Increase/decrease the volume level.
6 Screws
Remove the screws then install the wall
mounting screws into the back of the unit.
7 USB Socket
Insert the USB device to play music.
8 LINE IN Socket
Connect to an external audio device.
9 OPTICAL Socket
10 COAXIAL Socket
11 HDMI OUT (ARC) Socket
Connect to a TV via HDMI cable.
12 HDMI IN 1 / HDMI IN 2 Sockets
13 AC~ Socket
Connect to the power supply.
Wireless Subwoofer
1 AC~ Socket
Connect to power.
2 PAIR button
Press activate the pairing function between
the main unit and the subwoofer.
3 PAIR Indicator
Light stops blinking once the Subwoofer is
paired with the Soundbar.
6
O P T
1 2
6
3 4 5
7 8 9 10 11 12 13
1 2 3
7
Remote Control
1
Switch the unit between ON and
STANDBY mode.
2 (MUTE) Mute or resume the sound.
3 SOURCE
Select the play function.
4
(BT) Select the Bluetooth mode.
5 VOL+/VOL- Increase/decrease the volume level.
6 / Skip to previous/next track in BT/USB mode.
7 /PAIR Play/pause/resume playback in BT/USB mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect the
existing paired Bluetooth device.
8 EQ Select a preset sound effect.
9 SURR Adjust the surround ON/OFF.
10 DIMMER+/-
Adjust display brightness.
11 BASS
Press "BASS" then press VOL+/- button
to increase or decrease the bass.
12 TREBLE
Press "TREBLE" then press VOL+/- button
to increase or decrease the treble.
Preparations
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated within
•
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the unit and the
remote control.
If the Remote Control is operated near other
•
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products may
operate incorrectly.
Replace the Remote Control Battery
1 Press and slide the back
cover to open the battery
compartment of the
remote control.
2 Insert two AAA size
batteries (included). Make
sure the (+) and (–) ends of
the batteries match the (+)
and (–) ends indicated in
the battery compartment.
3 Close the battery
compartment cover.



Precautions Concerning Batteries
• Be sure to insert the batteries with correct
positive "" and negative "" polarities.
• Use batteries of the same type. Never use
different types of batteries together.
• Either rechargeable or non-rechargeable
batteries can be used. Refer to the precautions
on their labels.
• Be aware of your fingernails when removing
the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote
control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet
object.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur
and result in physical injury, and/or property
damage, and/or fire.
• Do not use any batteries other than those
specified.
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is confirmed
to be a rechargeable type.
8
EN
FR
ES
SL

HR

CZ
HU

PT
RO
PL
7