Table of Contents
Advertisement
Step 2:
Assembly of the Pulley, Guide Rods and Sliding Weight Post
1.
Attach the pulley (8) to the weight base tube (2) with one bolt (15), two washers (21) and one
lock nut (23).
2.
Attach the guide rods (3) and the sliding weight post (4) to the weight base tube (2) with the
sliding sleeves (11) and two square neck bolts (18).
3.
Attach the olympic spring clips (10) and the weight holders (9) to the sliding weight post (4).
21
Advertisement
Table of Contents
