Table of Contents
Advertisement
13. CONTROL MODE
13. Control mode
13.1 Indoor unit mode control
1. Main general technical parameters
(1) Remote receiver distance: 8 m.
(2) Remote receiver angle: Less than 80 degrees.
(3) Temperature control accuracy: ±1℃.
(4) Time error: Less than 1%.
2. Functions of the controller
Control function
2.1 Operator-machine communication
Air conditioning and remote controller is provided with a temperature sensor. The remote
controller on the temperature sensor detects the default settings of room temperature at room
temperature. If the indoor control unit has not received remote control signal for a long time, it
will automatically switch to the air conditioner body temperature sensor.
2.2 Timer function
(1) Timer on
When set to start in a time by the remote controller, the air conditioner starts in the timer on
condition. When the set time is up, the air conditioner will turn on and operates in the
preset conditions after receiving a signal from the remote controller. If the air conditioner has
not received a signal from the remote controller when the set time is up, it will automatically
start and operate in the preset conditions.
(2) Timer off
When set to stop in a set time by the remote controller, the air conditioner will start in the
timer off condition. When the set time is up, the air conditioner will turn off after receiving a
signal from the remote controller. If the air conditioner has not received a signal from the
remote controller when the set time is up, it will turn off automatically.
(3) Neither the turning on nor turning off operation will cancel the timer function.
2.3 Sleep
(1) In the heating, cooling or dehumidifying mode, press the "Sleep" button on the remote controller
to start or cancel the sleep function in turn, and at the same time the sleep icon on the display
screen will be on or off accordingly.
(2) In the heating mode, the set temperature will decrease automatically after the sleep function is
started.
40
Advertisement
Table of Contents
