Securing A Child Restraint Seat With “Tether Anchor” System - Hyundai 2009 Elantra Owner's Manual

Safety features of your vehicle
WARNING
- Auto lock
mode
The lap/shoulder belt automatically
returns to the "emergency lock
mode" whenever the belt is allowed
to retract fully. Therefore, the pre-
ceding seven steps must be fol-
lowed each time a child restraint is
installed.
If the retractor is not in the
Automatic Locking mode, the child
restraint can move when your vehi-
cle turns or stops suddenly. A child
can be seriously injured or killed if
the child restraint is not properly
anchored to the car, including set-
ting the retractor to the Automatic
Locking mode.
When the seat belt is allowed to
retract to its fully stowed position, the
retractor will automatically switch
from the "Auto Lock" mode to the
emergency lock mode for normal
adult usage.
3 26
Securing a child restraint seat with
"Tether Anchor" system
Child restraint hook holders are located
on the shelf behind the rear seats.
1JBA3052
1. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable headrest,
route the tether strap under the head-
rest and between the headrest posts,
otherwise route the tether strap over
the top of the seatback.
2. Connect the tether strap hook to the
appropriate child restraint hook holder
and tighten to secure the seat.
2GHA3300