Hyundai 2009 Elantra Owner's Manual page 43

3. Pull the shoulder portion of the seat
belt all the way out. When the shoulder
portion of the seat belt is fully extend-
ed, it will shift the retractor to the "Auto
Lock" (child restraint) mode.
MMSA3028
4. Slowly allow the shoulder portion of
the seat belt to retract and listen for an
audible "clicking" or "ratcheting" sound.
This indicates that the retractor is in
the "Auto Lock" mode. If no distinct
sound is heard, repeat steps 3 and 4.
Safety features of your vehicle
MMSA3029
5. Remove as much slack from the belt
as possible by pushing down on the
child restraint system while feeding the
shoulder belt back into the retractor.
6. Push and pull on the child restraint
system to confirm that the seat belt is
holding it firmly in place. If it is not,
release the seat belt and repeat steps
2 through 6.
7. Double check that the retractor is in
the "Auto Lock" mode by attempting to
pull more of the seat belt out of the
retractor. If you cannot, the retractor is
in the "Auto Lock" mode.
To remove the child restraint, press the
release button on the buckle and then
pull the lap/shoulder belt out of the
restraint and allow the seat belt to retract
fully.
MMSA3030
3 25