Basic Setting - HDL Tile Series User Manual

Click "Basic Information" in configuration page, as shown in Figure 2-1. This page includes
the following setting options:
① Indicator Intensity: includes LCD backlight and status indicator
 LCD backlight: means the backlight brightness in standby status.
 Status indicator: means the indicator brightness when indicating status.
② Press time setting: includes the time setting of long press and double click.
 Long Press: Keep pressing the button longer than the set time period, and the system
will identify as "Long Press". The range is from 0.3s to 25s.
 Double Click: The time interval between two clicks shorter than the set time period
will be identified as "Double Click". The range is from 0.1s to 2s.
③ Min. dimming value setting: means the minimum dimming value. The light brightness
will not decrease under this value during dimming operation.
④ Auto Lock: if enabled, the panel will be locked (NOT entering standby mode) in 20s after
the last operation. Press Button 1 and 4 can unlock/lock the panel.
⑤ Broadcast temperature: Built-in temperature sensor in Tile Panel enables temperature
detection. The temperature data, which can be adjusted with the slider, can be broadcast
to corresponding device if the Subnet ID and Device ID is set.
⑥ Standby display and page setting: to enable/disable energy-saving mode, and related
configuration. If energy-saving mode is enabled, the detailed configuration includes:
 Delay: to set the time period between the last operation and entering the energy-
saving mode.
 LCD standby level: the backlight brightness in energy-saving mode
 Indicator standby level: the indicator brightness in energy-saving mode
 Trigger when wake up: if enabled, the target will be triggered when wake up the panel
by pressing the button; if disabled, when the panel is in energy-saving mode, the first
press will wake up the panel, and the second press is to trigger the target.
HDL Automation Co., Ltd.
http://www.hdlautomation.com
Tile Series Button Panel (Buspro) User Manual

2 Basic Setting

3