Button Status Setting - HDL Tile Series User Manual

Tile Series Button Panel (Buspro) User Manual
Figure 3-2 Button Group Setting
Take Group 1 (including Button 1 and 5) as an example. Set the mode to "Combination", click
"Save" to save and quit, thus Button 1 and 5 are combined into Group 1 (Button 5 is hidden,
as shown in Mark ③ of Figure 3-2). Then Button 1 and 5 have the same function, which can
be set in "Button Mode".

3.3 Button Status Setting

Click "Status" Button to open Button Status window, as shown in Figure 3-3. This page
includes the following setting options:
① Status indicator: to enable/disable the status indicator of this button.
② Dimming: to enable/disable the dimming function of this button.
③ Dimming value: if enabled, the panel may memorize the dimming status of the lights when
the light is turned off, and recall the status after when turned on.
④ Mutual and Linkage: please keep default.
HDL Automation Co., Ltd.
http://www.hdlautomation.com 6