Sleep Group Setting - HDL Tile Series User Manual

The panel has two status: Sleep and Standby
 Sleep: triggered by command, and the panel will enter sleep mode (similar to pressing
the power button for the mobile phone to enter sleep mode)
 Standby: in a set period of time after last operation, the system enters standby mode
automatically (similar to the mobile phone entering standby mode with no operation for a
short period of time)
"Sleep Group" refers to the following situation: if one panel is waken up from sleep/standby
mode, other panels in the same sleep group will be waken up as well. Through configuration,
one panel can send command for all the panels in the same sleep group to enter sleep mode.
Despite that the standby status of the panels in the same sleep group stay independent.
Click "Sleep Group Setting" in configuration page, as shown in Figure 5-1.
HDL Automation Co., Ltd.
http://www.hdlautomation.com
Tile Series Button Panel (Buspro) User Manual

5 Sleep Group Setting

Figure 5-1 Sleep Group Configuration
13