Local Color Library Setting; White Balance Adjustment - HDL Tile Series User Manual

status.
2. On color:
The indicator color when the target is on (only valid for "Last status" in RGB Mode)
3. Off color:
The indicator color when the target is off (only valid for "Last status" in RGB Mode)

4.2 Local Color Library Setting

Press Button 2 and 3 to set on color and off color. The system has 8 pairs of color by default,
which can not be changed. User may select with Button 2 or 3. The changes will be saved in
20s after the last operation.
User may customize 5 pairs of color aside from the 8 default pairs. Select the color in
corresponding groups, as shown in Figure 4-2.

4.3 White Balance Adjustment

If the indicator color is not accurate, please set the button indicator color to white in "Button
Status Color Setting", and edit the RGB value (from 0 to 100) in "White Balance Adjustment"
to adjust white color, in order for correct indicator color.
HDL Automation Co., Ltd.
http://www.hdlautomation.com
Tile Series Button Panel (Buspro) User Manual
Figure 4-2 Edit Local Color Library
12