Target Setting - HDL Tile Series User Manual

Tile Series Button Panel (Buspro) User Manual
Figure 3-3 Button Status Setting

3.4 Target Setting

Select the button for target configuration on the left, and click "Target" button on the right to
open "Target Configuration" window, as shown in Figure 3-4.
Notice:
The number of the target depends on the button mode, ONLY one target is supported except
"Combination ON", "Combination OFF", "Combination ON/OFF", "Double click/combined",
"Short/long press", "Short press/long jog".
HDL Automation Co., Ltd.
http://www.hdlautomation.com 7