Table of Contents
Advertisement
5.2. Antenna Installation
5.2.1. Antenna Requirements
The following table shows the requirements on Wi-Fi/BT antenna.
Table 29: Antenna Requirements
Type
Wi-Fi/BT
5.2.2. Recommended RF Connector for Antenna Installation
If RF connector is used for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by HIROSE.
Figure 34: Dimensions of the U.FL-R-SMT Connector (Unit: mm)
SC20-WL_Hardware_Design
Requirements
VSWR: ≤ 2
Gain (dBi): 1
Max Input Power (W): 50
Input Impedance (Ω): 50
Polarization Type: Vertical
Cable Insertion Loss: < 1dB
Smart Wi-Fi Module Series
SC20-WL Hardware Design
68 / 81
Advertisement
Table of Contents
