CRT S 8040 Owner's Manual page 13

6) AM/FM
Modulation Mode selection: This key (6) [AM/FM] allows selecting the AM or FM modula-
tion. Your modulation mode has to correspond to the one of your correspondent.
With the version Full Multi Norm in the norm UK, your can switch between the EU band
and the UK band, which is indicated by symbol "EU" or "UK", by pressing the key (6)
[AM/FM ]. The CB band EU consists of the 40 CEPT channels.
The CB band UK consists of 40 channels starting from 27.60. 25 MHz to 27.99. 25 MHz.
7) CH9/19
It contains the priority channels 9 and . 9, press the key (7) [CH9/. 9] once to select priority
channel 9, press the key (7) [CH9/. 9] again to set priority channel . 9.
8) [ √ ] key (DN key on the microphone)
Channel down; selected channel downward.
9) [ ] key (UP key on the microphone)
Channel up; selected channel upward.
All channels can be selected by channel selector keys (8) or (9). The selected channel is
displayed on the LCD. In communication both transceivers (the receiving and transmitting
party) need to be in the same channel and under same modulation type.
. 0) SCAN
Press the key (. 0) [SCAN] to enable the SCAN function. Before enabling the SCAN
function, firstly turn the SQ control clockwise till the background noise is cut out.
Then press the key (. 0) [SCAN], radio will automatically scan all channels and the SC icon
will appear on the LCD.
When a signal is detected on a channel, scanning stops on this channel. You can receive
the calling, and also, can transmit on this channel by pressing PTT key. If there is no trans-
mission or detected signal on that channel within 5 seconds, radio will start scanning
again. To exit the SCAN function, press the SC key or the PTT key.
. . ) PTT (on the microphone)
To transmit, press and hold the key (. . ) [PTT] and the TX icon will appears on the LCD.
For best quality, please speak normally at a distance of 2 - 4 inches.
Speaking too loudly will cause distortions and make the signal difficult to understand.
On completion of the transmission release the PTT key and the radio will revert to
receiving mode.
9