3. INITIAL INSTALLATION
3.1 Mobile Installation
To install the transceiver, select a safe, convenient location inside
your vehicle that minimizes danger to your passengers and yourself
while the vehicle is in motion. Consider installing the unit at an
appropriate position so that knees or legs will not strike it during
sudden braking of your vehicle. Try to pick a well ventilated location
that is shielded from direct sunlight.
1.
Install
the
mounting
screws (2pcs) and flat washers (2pcs).
2.
Position the transceiver, then insert and tighten the supplied
hexagon SEMS screws.
Double check that all screws are tightened to prevent
vibration from loosening the bracket or transceiver.
bracket
in
the
3
using
the
supplied
Car body
Tapping screw
(M5x20mm)
Mounting bracket
self- tapping
Washer (M5)