CRT S MINI Manual

Single Norm: Designed for country which is illegal to use full standard norm.
1. Remove short circuit plug from position between 1-2 to position between 2-3. the radio
will work in single norm and not able to select other norms as the operation in full
standard Norms
Select the single norm: Hold "UP", to power on the radio. Select the norms by "UP",
2.
"DN", power off and repower on the radio, it will work in the norm you selected. This
norm will not change even after resumed.
Expanded Norms：
1：Open the radio bottom cover and find the white wire on the left side(L3)
2：Remove short circuit plug from position between 1-2 to position between 2-3.( J7)
3：Assemble the cover and re-power on the radio, it will work on expanded Norms

How to choose Norm and band in Expanded Norms

Select Norm
Hold AM/FM key to power while power on the radio, the LCD will display RU、PO、PC,
press [+]or [-] key to select desired mode and power off. Re-power on the radio , it will work
in the selected mode.
Select Band
After select the mode, when radio work normal, press and hold AM/FM for over 2 seconds,
the LCD displays present band, press [+]or [-] key to select desired band, press and hold
AM/FM for over 2 seconds to exit, the radio will work in the selected band.
Norms：RU、PO、PC
There are 3 expand norms, with 6 band in each Norm as following.
Ru Mode： A:
C:
E:
Po Mode： A:
C:
E:
Pc Mode： 5 channels that do not used in RU Norm
Power modification
Locate and cut the white wire L8 just near modulator transformer.
Press and hold PTT and in the same time power on the radio, on the display appears PH
release the PTT and push on again the display write OK .
Now the radio work with 7 .5 W in AM/FM
S MINI
25.615-26.055MHZ
26.515-26.955MHZ
27.415-27.855MHZ
25.610-26.050MHZ
26.510-26.950MHZ
27.410-27.850MHZ
B: 26.065-26.505MHZ
D: 26.965-27.405MHZ
F: 27.865-28.305MHZ
B: 26.060-26.500MHZ
D: 26.965-27.405MHZ
F: 27.860-28.300MHZ