Honda 2007 Odyssey Owner's Manual page 85

０６／０７／２６ １７：３２：３０ ３１ＳＨＪ６２０ ００８４
Outside Temperature Indicator
On EX and EX-L models
This indicator displays the outside
temperature in Fahrenheit (U.S.
models) or Centigrade (Canadian
models). To see the outside
temperature, press and release the
Select/Reset knob until the
temperature is displayed.
The temperature sensor is in the
front bumper. The temperature
reading can be affected by heat
reflection from the road surface,
engine heat, and the exhaust from
surrounding traffic. This can cause
an incorrect temperature reading
when your vehicle speed is under
19 mph (30 km/h). When you start
your trip, the sensor is not fully
acclimatized, therefore it may take
several minutes until the proper
temperature is displayed.
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
If the outside temperature is
incorrectly displayed, you can adjust
it up to 5°F in U.S. models ( 3°C
±
in Canadian models) warmer or
cooler.
NOTE: The temperature must be
stabilized before doing this
procedure.
To adjust the outside temperature
indicator, press and hold the Select/
Reset knob for 10 seconds. The
following sequence will appear for 1
second each: 0, 1, 2, 3, 4, 5,
3, 2, 1, 0 (U.S.) or 0, 1, 2, 3,
− − −
3, 2, 1, 0 (Canada).
− − −
±
When the temperature reaches the
desired value, release the Select/
Reset knob. You should see the new
outside temperature displayed.
Gauges
5, 4,
− −
CONTINUED
79