Honda 2007 Odyssey Owner's Manual page 241

０６／０７／２６ １７：５３：４１ ３１ＳＨＪ６２０ ０２４０
On models with a rear entertainment
system and a navigation system, you
cannot listen to XM Radio and a disc
at the same time. For example, when
XM Radio is playing on the front
speakers, you cannot listen to a disc
on the rear speakers, or vice versa.
Turn the tune knob left or
TUNE −
right to select channels. In the
category mode, you can only select
channels within that category.
CATEGORY − Press either side of
the bar ( − or ＋ ) to select another
category.
SCAN − The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN/RPT button or
touch the SCAN icon on the audio
display. The system plays each
channel in numerical order for a few
seconds, then selects the next
channel. When you hear a channel
you want to continue listening to,
press the button or touch the icon
again.
You can store up to 12
Preset −
preset channels using the six preset
buttons or preset icons on the audio
display. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the XM RADIO button.
Either XM1 or XM2 will show in
the display.
2. Use the TUNE knob, the
CATEGORY bar, or the SCAN
button to tune to a desired channel.
You can also touch the SCAN icon
on the audio display.
Playing the XM Satellite Radio
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3. Pick the preset button (icon) you
want for that channel. Press and
hold the button (icon) until you
hear a beep.
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM RADIO button again
or touch the other XM icon (XM1
or XM2) on the audio display.
Store the next six channels using
steps 2 and 3.
Once a channel is stored, press and
release the proper preset button
(icon) to tune to it.
235