Table of Contents
Advertisement
０６／０７／２６ １７：３１：１０ ３１ＳＨＪ６２０ ００７５
Instrument Panel Indicators
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It will
go off if you have inserted a
properly-coded ignition key. If it is
not a properly-coded key, the
indicator will blink and the engine
will not start (see page
This indicator also blinks several
times when you turn the ignition
switch from the ON (II) position to
the ACCESSORY (I) or LOCK (0)
position.
70
Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
If it comes on and stays on at any
other time, or if it does not come on
146
).
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page
330
for more information on the
VSA system.
On Touring models
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display (see page
VSA Activation Indicator
This indicator has three functions:
1.
It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
2.
It flashes when VSA is active (see
page
330
).
3.
It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
On Touring models
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display (see page
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. See page
330
89
).
information.
89
).
for more
Advertisement
Chapters
Table of Contents
