Driving Position Memory System - Honda 2007 Odyssey Owner's Manual

０６／０７／２６ １７：４６：４９ ３１ＳＨＪ６２０ ０１９０
On Touring model only
Your vehicle has a memory feature
for the driver's seat position.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or appropriate
remote transmitter (Driver 1 or
Driver 2).
This setting can be linked or
unlinked with the remote transmitter.
For more information, see page
You can change the ''MEMORY
POSITION LINK'' setting in the
multi-information display (see page
119 ).
Storing a Driving Position in
Memory
Store a driver's seat position only
when the vehicle is parked.
1. Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
154 . 2. Adjust the seat to a comfortable
position (see page

Driving Position Memory System

INDICATORS
3. Press and release the MEMO
173 ). button on the driver's door. You
will hear a beep. Then, both
indicators in the memory buttons
will start to blink. Press and hold
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.
MEMO BUTTON
MEMORY
BUTTONS
CONTINUED
185