Ferroli BlueHelix HiTech RRT C Instructions For Use, Maintenance And Installation Manual page 307

BlueHelix HiTech RRT C
Installer menu [SERVICE]
After selecting the installer menu [Service], press the button
word "1234". Use the buttons
heating to shift position (fig. 17).
Confirm with the button
menus are available:
•[TSP] - Menu for modifying transparent pa-
rameters
•[TEST] - Activation of boiler Test mode.
•[OTC] - Setting of climatic curves for adjust-
ment with external probe.
•[Zone] - Settings of climatic curves of addi-
tional zones.
•[Auto Setup] - This menu is used to acti-
vate calibration. Visible only with param-
eter b27 set to 5.
EN
and DHW to set the cell value, and the buttons
PASSWORD
0 0 0 0
fig. 17- Password entry
to access the installer menu[SERVICE] screen where the following
cod. 3541V300 - Rev. 00 - 02/2021
. To continue, enter the pass-
PASSWORD
1 2 0 0
SERVICE
TSP
Test
OTC
Zone
Auto Setup
fig. 18
and
307