Table of Contents
Advertisement
Tip: Depending on types of the received messages, some options mentioned
above are not available.
7.10 Using sound profiles
The sound Profiles menu allows to personalize the ring tone, key tone and dial tone. You
can also set the ring type, and adjust ring volume etc.
1. Go to Menu > Settings > Profiles, and set a ringtone mode: General / Silent / Meeting /
Outdoor. Press the left
h To activate the selected mode, press Select, then Activate.
h To reset the selected mode to default sound profiles, press Select, then Reset (not
applicable to Silent mode).
h To personalize the selected mode, press Select, then Customize to access available
options (not applicable to Silent mode):
ƒ Alert type
ƒ Ring type
ƒ Ringtone
ƒ Ring volume
ƒ Message
ƒ Keypad
ƒ Keytone volume
ƒ Vocalization
Tip: On the main screen, you can press and hold the
General, Silent, Meeting mode.
7.11 Using multimedia
Note: A memory card is required to use the multimedia functions. Up to
32 GB microSD card is supported.
h Multimedia section acts as an access hub to below phone tools:
ƒ Camera
ƒ Image viewer
ƒ Video recorder
ƒ Video player
key to open the Options.
Select an alert type of incoming calls: Ring, Vibrate only,
Vibrate and ring, and Vibrate then ring.
Select an ring type of incoming calls: Repeat and Beep once.
Select a ringtone of incoming calls from local ringtones or
stored audio files.
Adjust volume of incoming calls.
Select a ringtone of incoming messages.
Select a key tone or turn off the key tone.
Adjust volume of a key tone.
Turn on or off number voicing when pressing numeric keys
during the dialing of a number.
See "To use camera" on page 23.
See "To use image viewer" on page 23.
See "To use video recorder" on page 23.
See "To use video player" on page 24.
22
key to switch between
Advertisement
Table of Contents
