Transmit Mode; Erase Mode - Ford 2004 Crown Victoria Owner's Manual

Driver Controls

Transmit mode

1. Select the button for the desired
channel (for example, for the garage
door you wish to open).
2. Press the button. CHANNEL X
TRANSMIT is displayed.
3. The proper signal is transmitted
to the device being controlled.
4. Release the button.
Note: If more than one button is
pressed, priority will be given to the
lowest numbered channel.

Erase mode

To erase all three HomeLink channel codes:
1. Simultaneously press and hold
buttons 1 and 3 for 20 seconds.
2. CLEARING CHANNELS will be
displayed when the channel codes
are being erased.
3. CHANNELS CLEARED will be
displayed when the erase operation
is complete.
4. Release buttons 1 and 3.
55
2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English (fus)