Homelink Mode; Train Mode - Ford 2004 Crown Victoria Owner's Manual

Driver Controls

HomeLink mode

Train mode

Note: Do not train the HomeLink with the vehicle parked in the garage.
To train a HomeLink button to control a specific device:
1. Select the HomeLink button to
train.
2. Press and continuously hold the
button for 20 seconds. CHANNEL X
TRANSMIT will be displayed (X will
be 1, 2, or 3) during this time.
Note: If more than one button is
pressed, priority will be given to the
lowest numbered channel.
3. After 20 seconds, the display will
read CHANNEL X TRAINING to
indicate training has started.
Continue to hold the button.
Note: If the channel being trained
has not been previously trained, the
channel will immediately enter the
training mode (no 20 second delay).
4. Point the original garage door
opener/transmitter at the overhead
console. Hold down the original transmitter's button so the overhead
console can learn the transmitter's frequency and data stream.
5. Training will be complete in 100
seconds or less. CHANNEL X
TRAINED will be displayed when
training is complete.
53
2004 Crown Victoria (cro)
Owners Guide (post-2002-fmt)
USA English (fus)