Chapter 5 Connecting The S5U1C63007P To The Target System - Epson S5U1C63007P Manual

CHAPTER 5: CONNECTING THE S5U1C63007P TO THE TARGET SYSTEM
5 C
CHAPTER
This chapter describes how to connect the S5U1C63007P board to the target system.
To connect the S5U1C63007P board to the target system, use the I/O connection cable (80-pin/40-pin × 2,
flat type) included with this package. Handle with this connector carefully as the power (V
through this connector.
8
ONNECTING THE
T
TO THE ARGET
mark
Fig. 5.1 Connecting the S5U1C63007P to the target system
S5U1C63007P
S
YSTEM
CN1-2
(40-pin)
EPSON
S5U1C63007P MANUAL (PERIPHERAL CIRCUIT
) is supplied
DD
I/O connection cable
To target board
BOARD FOR S1C63557/63558/63567)
CN1-1
(40-pin)