Storing A Flat Or Spare Tire And Tools; Storing The Flat Tire And Tools; Storage Compartments - Chevrolet 2011 Cruze Owner's Manual

19. If this vehicle is the RS model,
snap the jack cover back into
place.
20. Remove the wheel blocks and
return them to their proper
storage location.
When reinstalling the wheel cover
or center cap on the full-size tire,
tighten all five plastic caps hand
snug with the aid of the wheel
wrench and tighten them with
the wheel wrench an additional
one quarter of a turn.
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
1. Replace the wheel wrench and
wheel blocks in the tool bag.
2. Remove the foam container from
the rear storage compartment.
3. Place the flat tire in the storage
compartment with the valve
stem down.
4. Place the jack and jack handle
extension in the foam container.
5. Place the foam container inside
the flat tire. Align the hole with
the stow rod.
6. Place the tool bag tether over
the stow rod.