Chevrolet 2011 Cruze Owner's Manual page 187

To Transfer Audio from the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press / .
2. Say Transfer Call.
To Transfer Audio to the Bluetooth
System from a Cell Phone
During a call with the audio on the
cell phone, press /
transfers to the vehicle. If the audio
does not transfer to the vehicle,
use the audio transfer feature on the
cell phone. See your cell phone
manufacturer's user guide for more
information.
Voice Pass-Thru
Voice pass thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the
cell phone:
1. Press
navigation system, say Hands
Free, after the tone.
2. Say Bluetooth.
3. Say Voice. The cell phone's
normal prompt messages will go
through their cycle according to
the phone's operating
instructions.
. The audio
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and the numbers stored as
name tags during a call. You can
use this feature when calling a
menu driven phone system.
Account numbers can also be
stored for use.
/ . For vehicles with a
Infotainment System
Sending a Number or Name Tag
During a Call
1. Press / .
2. Say Dial.
3. Say the number or name tag
to send.
Clearing the System
Unless information is deleted out of
the in vehicle Bluetooth system, it
will be retained indefinitely. This
includes all saved name tags in the
phone book and phone pairing
information. For information on how
to delete this information, see the
previous section Deleting a Paired
Phone and the previous sections
on deleting name tags.
7-33