When To Add Engine Oil; Selecting The Right Engine Oil - Chevrolet 2011 Cruze Owner's Manual

Hide thumbs Also See for 2011 Cruze:
Table of Contents

Advertisement

Checking the oil level too soon
after engine shutoff will not
provide an accurate oil level
reading.
2. Pull out the dipstick and clean
it with a paper towel or cloth,
then push it back in all the way.
Remove it again, keeping the tip
down, and check the level.
If the oil is below the cross-hatched
area at the tip of the dipstick, add
1 L (1 qt) of the recommended oil
and then recheck the level. See
Selecting the Right Engine Oil in
this section for an explanation of
what kind of oil to use. For engine
oil crankcase capacity, see
.
See
for the location of the
engine oil fill cap.
Add enough oil to put the level
somewhere in the proper operating
range. Push the dipstick all the way
back in when through.

Selecting the right engine oil

depends on both the proper oil
specification and viscosity grade:
Use and ask for engine oils with the
dexos
certification mark. Oils
meeting the requirements of the
vehicle should have the dexos
certification mark on the container.
This certification mark indicates that
the oil has been approved to the
dexos specification.
This vehicle was filled at the factory
with dexos approved engine oil.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cruze - annexe 880 2011

Table of Contents