License Plate Lamp; Replacement Bulbs - Chevrolet 2011 Cruze Owner's Manual

8. Install the taillamp assembly and
tighten the two screws.
9. Close the two screw covers.
To replace the license plate
lamp bulb:
1. Remove the two screws from the
license plate lamp assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
4. Push the new bulb into the
socket.
5. Install the bulb socket by turning
clockwise into the license plate
lamp assembly.
6. Replace the license plate lamp
assembly by using the two
screws to secure.
Back-Up Lamp
Front and Rear
Sidemarker Lamp
Front Parking/Turn
Signal Lamp
High Beam/Low
Beam and DRL
Headlamp
Rear Turn
Signal Lamp
Stop Lamp/Taillamp
For replacement bulbs not listed
here, contact your dealer.
921K
194
7444NA
H13LL
7443NA
3057K LCP