Manual Unlocking; Extraordinary Maintenance; Ce Conformity Declaration - Leb Electronics STONE 230 Instructions Manual

ENGLISH

Manual unlocking

The manual unblocking causes the release of the device from the leaf,
allowing the manual displacement of this one. It can be used in case of
electric voltage lack or of installation failure. The unblocking is got by means a
key that is to be kept by user in a sure and easily reachable place. In order to
obtain the unblocking of the device, proceed in the following way:
 Insert the socket spanner into the hole fitted on the traction arm.
 Turn the socket spanner in the direction indicated in fig.17, then open the
leaf of the gate by hand.
 To lock, move the leaf back to the hooking position with the traction arm.
Turn the socket spanner in the opposite direction and simultaneously push
the leaf to hook it.
Ordinary maintenance
It should be done any time it is required and anyway every six months:
 Clean and lubricate the hinges of the gate.
 Lubricate the unlocking group and the rotation pivot.
 Remove possible rubbles from the box and make sure that the device
has a good water drainage.
N.B.: Any operation of ordinary maintenance has to be performed by
qualified technical staff authorized by the Manufacturer.

Extraordinary maintenance

In the case hard interventions are required on the device, it is advisable to
remove this one, in order to allow the repairs in a workshop by technicians
of the Manufacturer or authorised by it.

CE CONFORMITY DECLARATION

Manufacturer declares that the device STONE comply with requirement of
the Directive 98/392/CEE and the Directive 2004/108/EC
Declares also that they have been applied the following harmonized norms:

EN55014-1, EN55014-2 + A1 + A3, EN60335-2-103, EN61000-3-2 + A1 + A2,
EN61000-3-3 + A1 + A2
Figure 17
(Machinery directive 98/37/CE)
12
.
Date, 3 April 2017