ENGLISH
After positioning the foundation box, proceed with the assem-
bling of gearmotor:
Let to pass the motor's cable coming from the installation by
means the special cable gland Pg9, fitted on the motor's cover.
Connect the cable coming from the installation to the motor's
cable piece by means of clamps (fig.5).
Tighten the cable gland Pg9 and connect the motor's cover to
the gearbox by means of the screws.
Anchor the gearmotor to the screws of the foundation box with
the supplied bolts (fig.6).
Figure 5
Installation - Chain version 180°
Insert the screw of chain stretcher in the special bolt welded on
the foundation box (fig.7).
Connect the chain stretcher group to the box pivot (fig. 8).
Figure 7
10
Figure 6
Figure 8