PCchips M583 Series User Manual page 14

M583LMR Mainboard User's Manual
The socket-7 processor installs into the ZIF (Zero Insertion Force)
socket-7 on the mainboard.
1. Locate the Socket-7 and FAN1. Pull the locking lever out
slightly from the socket and raise it to the upright position.
2. On the processor, identify the Pin-1 corner by its beveled edge.
3. On the Socket-7, identify the Pin-1 corner. The Pin-1 corner is
at the end of the locking lever when it is locked.
4. Match the Pin-1 corners and insert the processor into the
socket. No force is required and the processor should drop into
place freely.
5. Swing the locking lever down and hook it under the catch on
the side of the socket. This secures the CPU in the socket.
6. All processors should be installed with a combination heatsink/
cooling fan, connect the cable from the fan to the CPU fan
power connector FAN1.
10
Socket-7
Pin-1 Corner
FAN1