Table of Contents
Advertisement
Radius Server
IP Address:
Enter the IP address of Radius Server.
Port:
The default port of the RADIUS server for authentication is 1812. You need not change this
value unless your network administrator instructs you to do so with additional information.
Shared Secret:
Enter a password as the key to be shared between the external authentication server and
the access point. The key is not send over the network. This key must be the same on the
external authentication server and your router.
Session Timeout:
Set the time interval for session. Enter the proper value in the field.
Idle Timeout:
Set the idle time interval. Enter the proper value in the field.
Access Policy
Policy:
There are three options, including Disable, Allow, and Reject. You can choose Disable,
Allow or Reject. Select Allow, only the clients whose MAC address is listed can access the
router. Select Reject, the clients whose MAC address is listed are denied to access the
router.
Add a station MAC:
If you want to add a station MAC, enter the MAC address of the wireless station that are
allowed or denied access to your router in this address field.
After finishing the settings above, click Apply to save the settings and make the new
configuration take effect. Click Cancel to close without saving.
34
Advertisement
Table of Contents
