Windshield Wiper Blade Replacement - Chevrolet 2005 SSR Pickup Owner's Manual

Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected
periodically for wear and cracking. See Scheduled
Maintenance on page 6-4.
Replacement blades come in different types and are
removed in different ways. For proper type and length,
see Normal Maintenance Replacement Parts on
page 6-14.
Notice: Allowing the wiper blade arm to touch
the windshield when no wiper blade is installed
could damage the windshield. Any damage
that occurs would not be covered by your warranty.
Do not allow the wiper blade arm to touch the
windshield.
1. To remove the old wiper blades, lift the wiper arm
until it locks into a vertical position.
5-50
A. Blade Assembly
B. Arm Assembly
C. Locking Tab
2. Press down on the blade assembly pivot locking
tab. Pull down on the blade assembly to release it
from the wiper arm hook.
3. Remove the insert from the blade assembly. The
insert has two notches at one end that are locked by
bottom claws of the blade assembly. At the notched
end, pull the insert from the blade assembly.
D. Blade Pivot
E. Hook Slot
F. Arm Hook