Rev. 3/28/2017
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill
of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, installation, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Table of Contents:
Signal Words........................................................................................................................................ 2
Safe Use Recommendations.................................................................................................................... 2
Product Specifications.............................................................................................................................2
Labeling Diagram................................................................................................................................... 2
PLB exploded parts diagram & bill of materials............................................................................................. 3
Assembly Instructions............................................................................................................................ 3
Use Instructions.................................................................................................................................. ... 3
Inspections.......................................................................................................................................... 3
Maintenance.........................................................................................................................................4
Limited Warranty.................................................................................................................................... 4
Copyright 2017 Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
PLB-Series Wooden Pry Lever Bars
Instruction Manual
Vestil Manufacturing Corp.
Fax: (260) 665-1339
e-mail:
PLB, MANUAL
info@vestil.com
Page 1 of 4
Need help?
Do you have a question about the PLB Series and is the answer not in the manual?
Questions and answers