Taillamps, Turn Signal, And Stoplamps - Chevrolet 2005 Corvette Owner's Manual

7. Replace with a new bulb.
8. Replace the bulb socket by turning it clockwise into
the bulb assembly.
9. Replace the fasteners into the wheel well trim.
When replacing the fasteners, the two largest
fasteners will be replaced in the two bottom
positions of the wheel well trim. If not, you will find
that the fasteners do not fit properly.
6. Remove the bulb by
pushing in on the tab on
the bulb socket and
then remove the bulb.
Taillamps, Turn Signal, and
Stoplamps
To replace a stoplamp, taillamp/turn signal bulb, do the
following:
1. Remove the screw from the top of the lamp
assembly.
2. Tilt out the lamp assembly.
5-47