Easy Exit Seat - Chevrolet 2005 Corvette Owner's Manual

If your vehicle has the Auto Memory Recall feature and
it is turned on in the Driver Information Center (DIC),
the seat, mirrors and telescopic steering column position
will automatically adjust to their programmed positions
when the engine is started. See "Auto Memory
Recall" under DIC Vehicle Personalization on page 3-67
for more information.
To stop recall movement of the memory feature at any
time, press one of the power seat controls, power
mirror control buttons, memory buttons, or the telescopic
steering column switch.

Easy Exit Seat

Two personalized exit positions can also be
programmed to allow for an easy exit or entry into the
vehicle. The controls for this memory function are
located on the driver's door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver's seat exit position.
To program an exit position, use the following steps:
1. Recall the desired driving position by pressing
button 1 or 2.
The seat will move to the programmed
memory position.
2. Position the seat and the telescopic steering
column position to a comfortable exit position.
3. Press and hold the exit button until two
beeps sound.
Your exit position is now programmed.
A second exit position can be programmed by repeating
the above steps and pressing the other memory button.
To recall an exit position, do one of the following:
•
If you have an automatic transmission vehicle, press
and release the exit button while the vehicle is in
PARK (P).
One beep will sound and the exit position for the
currently identified driver will be recalled.
•
If you have a manual transmission vehicle, press
and release the exit button. If the vehicle is on,
the parking brake needs to be set to recall
the memory position.
One beep will sound and the exit position for the
currently identified driver will be recalled.
If your vehicle has the Auto Exit Recall feature and it is
turned on in the DIC, automatic seat and telescopic
steering column movement to the exit position will occur
when you use the keyless access transmitter to
unlock your vehicle or when you turn the engine off and
open the driver's door. See "Auto Exit Recall" under
DIC Vehicle Personalization on page 3-67 for more
information.
2-67