Finding A Station - Chevrolet 2005 Corvette Owner's Manual

To change the default on the display, press the
information button until you see the display you want,
then hold the button for two seconds. The radio will
produce one beep and the selected display will now be
the default.
n
AUTO (Automatic Volume): With automatic
volume, the audio system will adjust automatically to
make up for road and wind noise as you drive by
increasing the volume as vehicle speed increases.
Set the volume at the desired level. Press this button to
select MIN, MED, or MAX. AVOL will appear on the
display. Each higher setting will provide more volume
compensation at faster vehicle speeds. To turn
automatic volume off, press this button until AVOL OFF
appears on the display.
If your vehicle has the Bose
®
Bose AudioPilot noise compensation technology.
When turned on, AudioPilot
audio system to compensate for background noise,
so that your music always sounds the same at the set
volume level. This feature is most effective at lower radio
volume settings where background noise can affect
how well you hear the music being played through your
vehicle's audio system. At higher volume settings,
where the music is much louder than the background
noise, there may be little or no adjustments by
®
AudioPilot .
3-78
®
audio system, it includes
®
continuously adjusts the
®
To use AudioPilot , set the radio volume to your
desired level. Turn AudioPilot
automatic volume button until AVOL ON appears on the
display. As you increase vehicle speed, the background
noise in your vehicle will increase. AudioPilot
adjust your audio system's output for the background
noise it hears. To turn AudioPilot
automatic volume button until AVOL OFF appears on
the display. For additional information on AudioPilot
please visit www.bose.com.
MUTE: Press this button to silence the system. Press
this button again to turn the sound on.
This button is not available on the Radio with
Six-Disc CD.

Finding a Station

BAND: Press this button to switch between FM1, FM2,
AM, or XM1 or XM2 (if equipped). The display will
show the selection.
O
e
/ (Tune): Turn this knob to select
radio stations.
t u
SEEK : Press the right or the left arrow to go to
the next or to the previous station and stay there.
The radio will only seek stations with a strong signal
that are in the selected band.
®
on by pressing the
®
will
®
off, press the
®
,