Setting Up; Installation Mode; Parts For Ceiling Mount (Optional) - Panasonic PT-TW371R Operating Instructions Manual

Setting up

Installation mode

There are four ways to set up the projector. Set the [Display] menu → [Project way] (x page 53) depending on the
installation location.
Setting on a desk/floor and projecting forward
Menu item
[Project way]
Mounting on the ceiling and projecting forward
Menu item
[Project way]
Note
f The interactive function cannot be used when projecting from rear.

Parts for ceiling mount (Optional)

This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL430B (Projector Mount Bracket)
f Use only the ceiling mount brackets specified for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or
a qualified technician.
Chapter 2 Getting Started - Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[Front]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Method
[Ceiling/Front]
Menu item
[Project way]
Menu item
[Project way]
Method
[Rear]
Method
[Ceiling/Rear]
ENGLISH - 29