Panasonic PT-TW371R Operating Instructions Manual page 65

[Corner correction]
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Corner correction].
4) Press the <ENTER> button.
f The corner correction arrows are displayed on the upper left corner of the projected image.
f The corner to be adjusted switches in order of upper left → upper right → lower left → lower right each time you press
the <KEYSTONE> button on the remote control or the control panel.
5) Press asqw to adjust.
Upper left
Note
f The red arrow indicates the direction in which distortion has been corrected while the white arrow indicates the direction in
which distortion has not been corrected.
f The arrow disappears when correction reaches the maximum level.
[Curved correction]
1) Press as to select [Keystone].
2) Press the <ENTER> button.
f The [Keystone] screen is displayed.
3) Press as to select [Curved correction].
4) Press the <ENTER> button.
f The [Curved correction] screen is displayed.
f The item switches in order of [Curved correction X/Y Gain] → [Curved correction X Offset] → [Curved correction Y
Offset] each time you press the <KEYSTONE> button on the remote control or the control panel.
5) Press asqw to adjust the item.
Items
Press the w button.
Press the q button.
[Curved
correction X/Y
Gain]
Press the a button.
Press the s button.
Chapter 4 Settings - [Expand] menu
[Corner correction]
Upper right
Operation
The left and right vertical lines will be
bulge.
The left and right vertical lines will be
dent.
The top and bottom horizontal lines will
be bulge.
The top and bottom horizontal lines will
be dent.
Lower left
Adjustment
Lower right
ENGLISH - 65