Table of Contents
Advertisement
13
Top
Projection direction
13 Control panel and Indicators
14 Lamp cover (x page 98)
The lamp unit is located inside.
rControl panel and Indicators
1 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
2 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
3 asqw buttons
Used to select the menu items in the menu operation.
<MENU> / q button
4
Displays or hides the main menu. (x page 48)
When the sub menu is displayed, pressing it will return to
the previous screen.
Note
f The <INPUT/ENTER> button on the control panel is functioned as the <ENTER> button when the menu screen is displayed.
The operating procedure of menu screen is described as "Press the <ENTER> button" in this manual in order to unify the
control panel operation with the remote control operation.
24 - ENGLISH
Chapter 1 Preparation - About your projector
14
15
1
2
3
4
Bottom
1
15 Focus ring
Adjust the focus.
5
6
7
5 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
6 <KEYSTONE> button
Corrects the distortion of the projected image.
(x page 43)
7 <INPUT/ENTER> / w button
Displays the input source menu. (x pages 39)
Determines or executes an item in the menu screen.
9
1
Advertisement
Table of Contents
