Network Connection; When Connecting Via Wired Lan - Panasonic PT-TW371R Operating Instructions Manual

Network connection

This projector has network function that allows the following by connecting a computer. The wireless module (Model No.:
ET-WML100) of the optional accessories is required if you want to use the network function through the wireless LAN.
f WEB control
By accessing to the projector from a computer, you can perform setting, adjustment, status display, etc. of the projector.
Refer to "Web control function" (x page 86) for details.
f Multi Monitoring & Control software
"Multi Monitoring & Control Software", a software application to monitor and control multiple display devices (projector or flat
panel display) connected to intranet, can be used.
Plug-in software "Early Warning Software", which monitors the status of the display devices and their peripherals within an
intranet, and notifies of abnormality of such equipment and detects the signs of possible abnormality, can also be used.
For details, visit the Panasonic website (https://panasonic.net/cns/projector/).
f Image transfer application software
Using the Panasonic image transfer application software, the image sent from a device can be displayed as a projected
image.
For details on how to use the image transfer application software "Presenter Light" compatible with Windows
computers, please refer to the Operating Instructions of the "Presenter Light" software. The "Presenter Light" software
can be downloaded by accessing the projector via a web browser. For details, please refer to "About Presenter Light"
(x page 85). The applicaton software and its operating instructions can be downloaded from our website
(https://panasonic.net/cns/projector/).
For details of the image transfer application software "Wireless Projector" compatible with the iPad/iPhone/iPod touch or
Android device, refer to the Panasonic website (https://panasonic.net/cns/projector/).
f PJLink
By using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer. Refer to
"Using the PJLink protocol" (x page 102) for details.

When connecting via wired LAN

Connection example
r Name and function of <LAN> terminal
1 LAN LINK/ACT lamp (yellow)
Lights on when connected.
Blinks when transmitting/receiving data.
2 <LAN> terminal (10BASE-T/100BASE-TX)
Used to connect LAN cable here.
82 - ENGLISH
Chapter 5 Operation of Function - Network connection
Computer
LAN cable (straight)
Projector
LAN cable (straight)
Hub
1 2 3
3 LAN 10/100 lamp (green)
Lights on when connected to the 100BASE-TX.