Media Configuration; Universal Setup; Custom Scan Sizes - Sharp MX-B427W User Manual

Use printer menus
Media Configuration

Universal Setup

Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3.90–14.17 inches (8.50*)
99–360 mm (216*)
Portrait Height
3.90–14.17 inches (14*)
99–360 mm (356*)
Feed Direction
Short Edge*
Long Edge
Note: An asterisk (*) next to a value indicates the factory default setting.

Custom Scan Sizes

Menu item
Custom Scan Size [x]
Scan Size Name
Width
1–8.50 inches (8.50*)
25–216 mm (216*)
Height
1–14 inches (14*)
25–356 mm (297*)
Orientation
Portrait*
Landscape
2 scans per side
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width of the universal paper.
Set the portrait height of the universal paper.
Set the printer to pick paper from the short edge or long edge
direction.
Note: Long Edge appears only when the longest edge is shorter
than the maximum width supported.
Description
Assign a scan size name and configure the scan settings.
72