Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson ET-2760 User Manual

Parent topic:

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your product to the network.
1. Press the WPS button on your router.
2. On the product, press the
3. Press the arrow buttons to select Settings > Network Settings > Wi-Fi Setup.
You see this screen:
4. Press the arrow buttons to select Push Button (WPS) and press the OK button.
5. Follow the instructions on the LCD screen to complete WPS setup.
Wi-Fi Direct Mode Setup
Wi-Fi Networking
home button, if necessary.
37