Table of Contents
Advertisement
10. Close the paper support, feeder guard, and output tray. Then lower the control panel by squeezing
the release bar and gently pushing the panel down.
Caution: Do not lower the control panel without first squeezing the release bar or you may damage
your product.
11. Place the product in its original packaging materials, if possible, or use equivalent cushioning around
the product.
Be sure to remove the tape from the print head before turning on your product. If print quality has
declined when you print again, clean and align the print head.
Parent topic:
Cleaning and Transporting Your Product
Related concepts
Print Head Cleaning
Print Head Alignment
174
Advertisement
Table of Contents
