Sharp MX-1800N User Manual page 50

4
5
6
Do not return the removed cleaner to the top of the waste toner box.
7
Make sure that the cleaner at the tip of
the cleaning tool is not dirty.
If the cleaner is dirty, remove the cleaner and replace it with a
clean one. For the procedure for replacing the cleaner, see
Cleaner
steps 5 through 7. If the cleaner is not dirty, go to step 8.
Pull the replacement cleaner out of the
waste toner box.
The replacement cleaner is stored at the top of the waste toner
box.
Grasp the end of the cleaner and pull it out of the waste toner
box.
Remove the dirty cleaner from the tip of
the cleaning tool.
(1) Firmly grasp the tool close to where the
(2) Use your other hand to press down on the
Attach the new cleaner to the cleaning
tool.
(1) Align the cleaner hook with the attachment
(2) Hold the cleaner firmly and push the
49
cleaner is attached.
hook that secures the cleaner and remove
the cleaner.
hole in the cleaning tool.
cleaning tool in.