Sharp MX-1800N User Manual page 17

3
• Note that the [LOGOUT] key (
[LOGOUT] key (
• If a preset duration of time elapses after the machine is last used, the Auto Clear function will activate. When Auto
Clear activates, logout automatically takes place. However, when PC Scan mode is used, logout does not take
place when the [LOGOUT] key (
the machine and then log out.
If an incorrect user number is entered 3 times in a row...
If "A Warning when Login Fails" is enabled in the system settings (administrator), the machine will lock for 5 minutes if
an incorrect user number is entered 3 times in a row.
Verify the user number that you should use with the administrator of the machine.
The administrator can clear the locked state. This is done from [User Control] and then [Default Settings] in the Web page
menu.
LOGOUT
) cannot be used to log out when a fax number is being entered in fax mode, as
) input is treated as part of a fax number.
) is pressed and Auto Clear does not operate. Change to a different mode on
When you have finished using the
machine and are ready to log out, press
the [LOGOUT] key (
16
).