Transporting; Transporting A Unit - Encore Rage ER32FS600VL Operator's Manual

HIGH
Belt and Floating Idler Bar shown in high range

TRANSPORTING

TRANSPORTING A UNIT

Use a heavy-duty trailer or truck to transport the
machine. Lock brake and block wheels.
Securely fasten the machine to the trailer or
truck with straps, chains, cable, or ropes. Be
sure that the trailer or truck has all necessary
lighting and marking as required by law.
Secure a trailer with a safety chain.
LOW
This unit does not have proper turn signals,
lights, reflective markings, or a slow moving
vehicle emblem. Driving on a street or
roadway without such equipment is
dangerous and can lead to accidents
causing personal injury. Driving on a street
or roadway without such equipment may
also be a violation of State laws and the
operator may be subject to traffic tickets
and/or fines.
Do Not drive a unit on a public street or
roadway.
Loading a unit on a trailer or truck increases
the possibility of backward tip-over.
Backward tip-over could cause serious
injury or death.
•
•
•
•
22
CAUTION
WARNING
Lock operator platform into the up
position when loading unit.
Use extreme caution when operating a
unit on a ramp
Use only a single, full width ramp; Do
Not use individual ramps for each side of
the unit.
If individual ramps must be used, use
enough ramps to create an unbroken
ramp surface wider than the unit.