Function And Control; Remote Controller Introduction; Preparation Before Operation; Introduction Of Operation Function - Nobu NBL4-09IDU32 Service Manual

Service Manual
Service Manual

6. Function and Control

6.1 Remote Controller Introduction

6.2 Preparation before operation

When using the remote controller for the first time or after replacing the batteries,
please set the time of the system according to current time in the following steps:
Pressing CLOCK button,
(1).
Pressing or
(2).
Press CLOCK button again to confirm the time and return to display current time.
(3).

6.3 Introduction of operation function

Selecting operation mode
(1).
In unit on status, press MODE button to select operation mode in following sequence:
Setting temperature
(2).
In unit on status, press
range of temperature is from 16ºC to 30ºC.
Note: Under auto mode, manual adjustment of temperature is not needed.
Adjusting fan speed
(3).
In unit on status, press FAN button to adjust fan speed in following sequence:
Notes:
①.
When operation mode changes, fan speed is memoried;
②.
Under dry mode, fan speed is low and can not be adjusted.
Setting swing function
(4).
Setting left&right swing
Under simple swing status, press
1).
Technical Information
Technical Information
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
is blinking.
button, the clock time will increase or decrease rapidly.
button to increase setting temperature and press
button to adjust left&right swing status;
Button name
ON/OFF
TURBO
MODE
I FEEL
TEMP Switch temperature displaying type on the unit's display
LIGHT
X-FAN
SLEEP
CLOCK
TOFF
TON
FAN
/
button to decrease setting temperature. The
Function
Turn on or turn off the unit
Set turbo function
Set operation mode
Set up&down swing status
Set I FEEL function
Set health function and air function
Set light function
Set X-FAN function
Set sleep function
Set clock of the system
Set timer off function
Set timer on function
Set left&right swing status
Set fan speed
Set temperature and time
27
15