Installation; Installation Flow Chart - ABB Johnson Controls AYK550-UH User Manual

A 550-UH User's Manual

Installation

Study these installation instructions carefully before proceeding. Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
WARNING! Before you begin read

Installation flow chart

The installation of the AYK550 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
PREPARE for installation
PREPARE the mounting location
REMOVE the front cover
MOUNT the drive
INSTALL wiring
CHECK installation
REINSTALL the cover
APPLY power
START-UP
Task
Preparing for installation
Prepare the mounting location
Remove front cover
Mount the drive
Wiring overview
Install the wiring
Check installation
Re-install cover
Apply power
Start-up
Safety on page 1-3.
on page 1-10.
on page 1-16.
on page 1-17.
on page 1-18
on page 1-23.
on page 1-27.
on page 1-27.
on page 1-29.
on page 1-30.
See
on page 1-14.
and
Installation
1-9