Workplace Hazard Analysis - Union Instruments INCA4003 Translation Of The Original Operating Instructions

Safety notes

2.6 Workplace hazard analysis

NOTE
Depending on the national regulations, the operator must perform a workplace
hazard analysis, if applicable independent of the CE mark for this process gas
analyser.
Technical developments can give rise to deviations from these operating
instructions. If you require additional information or if particular problems arise
that are not fully addressed in this manual, please contact the following address:
Union Instruments GmbH
Zeppelinstrasse 42
76185 Karlsruhe
Germany
+49 (0)721-680381-0
+49 (0)721-680381-26

support@union-instruments.com
http://www.union-instruments.com
14