Automatic Transaxle Fluid; How To Check - Chevrolet 2002 Venture Owner's Manual

Table of Contents

Advertisement

Automatic Transaxle Fluid

When to Check and Change
A good time to check your automatic transaxle fluid
level is when the engine oil is changed.
Change both the fluid and filter every 50,000 miles
(83 000 km) if the vehicle is mainly driven under one or
more of these conditions:
D
In heavy city traffic where the outside temperature
_
regularly reaches 90
F (32
D
In hilly or mountainous terrain.
D
When doing frequent trailer towing.
D
Uses such as found in taxi, police or delivery service.
If you do not use your vehicle under any of
these conditions, change the fluid and filter
at 100,000 miles (166 000 km).
See "Scheduled Maintenance Services" in the Index.

How to Check

Because this operation can be a little difficult, you may
choose to have this done at the dealership service department.
If you do it yourself, be sure to follow all the instructions
here, or you could get a false reading on the dipstick.
_
C) or higher.
NOTICE:
Too much or too little fluid can damage your
transaxle. Too much can mean that some of the
fluid could come out and fall on hot engine parts
or exhaust system parts, starting a fire. Too little
fluid could cause the transaxle to overheat. Be
sure to get an accurate reading if you check your
transaxle fluid.
Wait at least 30 minutes before checking the transaxle
fluid level if you have been driving:
D
When outside temperatures are above 90
D
At high speed for quite a while.
D
--
In heavy traffic
especially in hot weather.
D
While pulling a trailer.
To get the right reading, the fluid should be at normal
operating temperature, which is 180
_
_
(82
C to 93
C).
Get the vehicle warmed up by driving about 15 miles
(24 km) when outside temperatures are above 50
_
(10
C). If it's colder than 50
to drive longer.
_
_
F (32
C).
_
_
F to 200
F
_
F
_
_
F (10
C), you may have
6-21

Advertisement

Table of Contents
loading

Table of Contents